Thermia Calibra Cool, Installation Manual

Page: 31 / 44

Symbol Description
Operating mode On/Auto (normal mode)
All activated functions are on. By factory default, heating and hot water is produced. Com-
pressor and internal immersion heater are controlled automatically.
Operating mode Auxiliary heater only.
Compressor is off, but with factory setting the unit can produce heating and hot water with
the internal immersion heater, this maybe useful in case of certain alarms, and/or during in-
stallation and commissioning of the heat pump. External functions are on, when applicable.
Operating mode Off.
All functions are off. Note that components inside the heat pump are still current carrying.
No heat or hot water will be produced.
If the heating system is very cold, auxiliary heater may be used initially to simplify start up. Tap water production is enabled (factory
setting). The heat pump will start producing hot water before space heating.
Note: Do not shut off the electrical power to the heat pump when the compressor is running. ( When planned, set the operating mode to
off position and allow compressor to stop completely before shutting off the electrical power to the heat pump.)
8.2 Online
The heat pump is factory prepared for monitoring remotely via internet. (Thermia Online)
In order to use the Thermia Online service:
▪
Make sure that there is an available internet connection (router or equivalent) in the building
▪
Connect the commissioned heat pump to an existing internet connection (router or equivalent). Use the RJ45 connection placed
below the display (CM module) behind the front panel. Use a patch cable (not cross over cable).
▪
1. Press on the Start screen to open the Menu screen.
2. Press on Settings
.
3. Press on the text System settings.
4. Press on the text Online.
5. Press
to activate.
▪
Make a note of the heat pump MAC-address. The MAC-address is also available in the Network menu in the display
▪
An account and registration is required to use the Thermia Online service.
For more information, see:
www.thermia.com/online
Installation Guide Calibra Cool
Thermia AB BWCC01IG0102
31