Thermia Calibra Cool, Installation Manual

Page: 25 / 44

8 Commissioning
8.1 Installer access
Certain functions will be locked and only accessible with the correct access code. To gain access, the following steps must be made:
1. Press on the Start screen to open the Menu screen.
2. Press
3. Press the input area to open up the num pad.
4. Enter the code for installer access, 607080 and confirm by pressing the white tic in the lower right corner.
5. Once back in the previous menu, the green tic in the lower right corner needs to be pressed, to make the final confirmation.
Note:
▪
The access code is active for 8 hours. After 8 hours, logging out or restart, the code must be entered again.
8.1.1 Select display language
1. Press in the upper left corner of the Start screen
2. Press
3. Press on the text Language.
4. Select language.
5. Press to return to System settings.
Or press in the upper left corner to return to the Menu screen.
8.1.2 Setting date and time
1. Press in the upper left corner of the Start screen.
2. Press
3. Press on the text System settings.
4. Press on the text Date/time.
5. Press + or – for each field to change the setting.
6. Press
to confirm settings.
7. Press to return to System settings.
Or press in the upper left corner to return to the Menu screen.
8.1.3 Internal Immersion Heater
1. Press on the Start screen to open the Menu screen.
2. Press on Settings
.
3. Press to go to the menu page for Internal immersion heater.
4. Press on the text Internal immersion heater.
5. Make the desired changes.
6. Confirm settings by pressing
(For steps, kW and fuse sizes, see electrical installation chapter)
Installation Guide Calibra Cool
Thermia AB BWCC01IG0102
25