Service Manual for Thermador Pro Grand LP Gas Ranges, Models: PRL304EG, PRL364EDG, PRL364ELG, PRL366EG, PRL484ECG, PRL486EDG, PRL486EDPG, PRL484ELG
58300000156573_ARA_EN_B
Page 99 of 119
Figure 197: Bake Burner Brackets
1
U-shaped (fixed) bracket
2
Straight bracket with two screws
9. Remove and retain the two screws holding the two ends of the
burner onto the burner box chassis (see Figure 198).
10. Pull the burner out gently from the burner box, and replace burner
or adjust air shutter if needed (see Figure 199).
NOTE:
Although the air shutter is optimally set in the factory, it
may be adjusted by unscrewing the adjustment screw and rotating
the air shutter so that its opening is more open or closed (see
Figure 199 and
on page
).
11.
NOTE:
When installing the bake burner make sure that it snaps
correctly into place, so that the air shutter (Figure 199) is aligned
with the orifice assembly (see Figure 210, page 104 and
Figure 211, page 104), and so the back end of the bake burner fits
all the way into the U-shaped bracket (see Figure 197).
Figure 198: Screws at Ends of Bake Burner
1
Screws (2) at ends of bake burner
Figure 199: Large Oven Bake Burner
1
Air shutter (adjustment screw not shown)
