Service Manual for Thermador Pro Grand LP Gas Ranges, Models: PRL304EG, PRL364EDG, PRL364ELG, PRL366EG, PRL484ECG, PRL486EDG, PRL486EDPG, PRL484ELG
58300000156573_ARA_EN_B
Page 70 of 119
Figure 132: Locations to Remove Knobs and Manifold Support
Bracket Screws
1
Location attached to manifold support bracket
2
Location attached to manifold support bracket
5. Unscrew and remove the bezels for the oven lamp switches.
6. At the bezels on the control panel, remove and retain the screws
that connect to the two manifold support brackets (see
Figure 132).
7. At the bezels on the control panel, remove the bezel screws and
bezels that connect to the following components: five-position
oven function selector, three-position oven function selector,
griddle/grill control(s), oven temperature select switch(es).
8. Use a swivel head driver or an open end wrench to remove and
retain the three nuts with lockwashers from both sides of the
range (see Figure 133).
Figure 133: Three Nuts / Lockwashers (Right Side of Range Shown)
9. Remove and retain the screw at the right and left side panels
(see Figure 134).
Figure 134: Removing Screws at Sides
1
Screws (1 per side) to remove at right and left sides
