Service Manual for Thermador Pro Grand LP Gas Ranges, Models: PRL304EG, PRL364EDG, PRL364ELG, PRL366EG, PRL484ECG, PRL486EDG, PRL486EDPG, PRL484ELG
58300000156573_ARA_EN_B
Page 119 of 119
■
Make sure all panels and components are properly and securely
reassembled.
■
Make sure the range is level and adjust accordingly.
■
If the range was pulled away from the wall for servicing, cleaning,
or any other reason, make sure that the range is properly secured
onto the anti-tip device when the range is pushed back against the
wall (not needed for 48-Inch ranges). See the Installation
Instructions manual for details on anti-tip device installation.
6 CLEAN-UP
After you have finished servicing an appliance, clean up grease,
fingerprints, and other residue that is present as the result of servicing
the appliance.
Clean-up Hazards
■
Don’t allow any cleaning or polishing solutions/compounds,
disinfectants or bleaches to remain in contact with the stainless
steel surfaces for long periods, or after clean-up. These may
contain chemicals or materials which could release harmful
inhalants or may damage the appliance. After cleaning or
polishing, always rinse the cleaning/polishing materials with clear
water and wipe dry with a clean, soft, non-abrasive cloth.
■
Clean the range with caution. Do not use flammable cleaners to
clean the range. Avoid steam burns; do not use a wet sponge or
cloth to clean the range while it is hot. Do not use any type of
aerosol cleaner on or around the rangetop when hot. Some
cleaners produce noxious fumes if applied to a hot surface. Follow
directions provided by the cleaner manufacturer.
7 ADDITIONAL RESOURCES
7.1 QuickFinder
For further information, please refer to the following documents on
QuickFinder:
■
Installation
Instructions
■
Care and Use Manual
In addition, the following may be available on QuickFinder at
■
Product Information screen (has technical specification for the
appliance)
■
Gas Information (Repair Instruction)
■
Wiring
Diagram
■
Accessories
List
■
Spare Parts Notes/Information (Technical Service Bulletins, and
Technical Information Bulletins)
■
Exploded View Drawing
■
Parts
List
NOTE:
Not all service parts are shown on the QuickFinder
exploded views; review the Parts List for additional information.
7.2 Technical Support
For Thermador technical support, call (800) 444-9091 between
5:00 am and 5:00 pm, Monday – Friday, Pacific Standard time.