The Wine Square CUBE LT, User Manual

Page: 27 / 60

25
3 Turn the control box to “ON” by flipping the power
button on the side of the device.
CAUTION Do not start the water chiller at
this point. Water must be put into the sys-
tem before it is started.
4 Fill the reservoir with distilled water until the reser-
voir is full. It is normal for the pump to start and stop
a few times during filling. A water level sensor inside
the tank ensures that the pump stops when there is
water missing.
CAUTION To prevent the formation of algae or other contaminants in the
system. Always use sterile water such as distilled water to fill the system.
5 Turn the control box to “OFF” by flipping the power
button on the side of the device.
Wait 30 seconds
Turn the control box back to “ON” by flipping the
power button on the side of the device.
Add water in the tank as needed.
30
SECS