6
The
CUBE
LT
Control Box is the unit managing the system. Equipped with a high-resolution
7” touch screen, it allows the display and simple adjustment of the conditions of the wine
cellar. It provides the electrical power and the chilled water to the
RC4-LT
module in the
wine cellar by means of a network wire and two 1/2” PEX pipes. The
CUBE
LT
Control Box
must be connected to a closed circuit chilled water source coming either from the
CUBE
LT
Water Chiller or from a plate heat exchanger connected to the chilled water of the building.
Very ecological and safe, it uses no refrigerant gas and therefore always recirculates the
same water. It is normally installed in a garage or mechanical room.
CONTROL BOX
Voltage
____________________________________________
Amperage
_______________________________________
Power
_______________________________________________
Plug
_________________________________________________
Inlet / Outlet
___________________________________
Maximum Water T°
________________________
Minimum Water T°
__________________________
Flow Rate
________________________________________
Internet Connection
________________________
120V 60Hz
0.75 A
90W
NEMA 5-15P
1/2” PEX
48°F (9°C)
32°F (0°C)
20 L/min
RJ45
SPECIFICATIONS
Summary of Contents for CUBE LT
