2. General Safety Tips
CAUTION!
During the print process the printhead will become hot. Do NOT attempt to clean the
printhead until it has had time to cool.
The Printhead is the Most Fragile part of your Printer. Do NOT use sharp or hard objects to
clean the Printhead. Do NOT touch the glass surface of the Printhead with your hand.
This Printer is built exclusively to print labels, tickets and tags, continuous paper, etc. Only
use media that is recommended for a direct thermal or thermal transfer Printer.
The Printer is configured for input voltages of 110 to 240 V. Connect only to a power outlet
with a grounded contact. Always ensure the Printer is switched OFF before connecting the
power cord to an electrical outlet.
Do not expose the Printer to moisture or operate it in wet or damp areas.
The Printer will operate with the cover open if necessary. This is not recommended, as the
Printer’s moving or rotating parts can cause injury. Keep long hair, jewelry and loose clothing
away from any moving parts.
Remove the power cord from the rear of the Printer when disconnecting or attaching
accessories such as rewind units, cutters, etc.
3. Unpacking the Printer and Accessories
Check the condition of the packaging and contents for possible damage during transit.
NOTICE: Please retain original boxes and all original packing materials in
case the Printer must be returned.
In addition to this manual the following items should be included with your Printer:
Bar Code Printer
Power Cord (110V or 230V)
Empty Ribbon Roll
Quick Start Guide
Accessories CD: Includes Label Software, Manuals and Windows Drivers
The following additional items are necessary for generating labels from your Printer:
Serial, Parallel, or USB cable
Applicable media (label stock/ribbon)
- 7 -
