3. Select “Specify a location” as the
location of the driver. (the drivers are
in the USB_Serial Converter Drivers
directory on the CD). click “Next”.
Once the USB device driver is located
click “Next”. The driver will be
installed and the wizard will close.
This USB device driver uses a virtual
COM port that redirects any data sent
to it out of the PC’s USB port. It will
be listed in Device manager as an
additional COM Port.
Go to Control Panel\System\Device
Manager and the USB device’s port will
be listed under Ports (COM & LPT).
The example shown on the right
indicates that the USB Serial Port is
COM3.
After the USB device driver is installed,
the USB device can be used through
any software (such as EASYLABEL or
Windows drivers) to print labels. In
this example we would send any print
job for this Printer to COM3.
4.
5.
6.
7.
- 28 -
