manualshive.com logo in svg

Texas TMS320C6000, Programmer'S Reference Manual

The Texas TMS320C6000 Programmer's Reference Manual is a comprehensive and indispensable resource for users of this advanced DSP platform. This manual provides detailed information and guidance on utilizing the TMS320C6000's features efficiently. Download your free copy now from manualshive.com to unlock the full potential of this powerful technology.

Share
Download
background image

Route Object

A-37

 Internal Stack Functions

-

FLG_RTE_REJECT – Entry is rejecting

When set, indicates that the route is to an invalid address. All packets des-
tined for this address are discarded with an error indication.

-

FLG_RTE_MODIFIED – Route has been auto modified

When set, indicates that the route has been modified as a result of an
ICMP redirect message. This can occur only to GATEWAY routes, and
only if ICMP modifications are enabled in the stack configuration.

-

FLG_RTE_DYNAMIC – Route has been auto created

When set, indicates that the route has been created as a result of an ICMP
redirect message. ICMP can only create GATEWAY routes, and may do so
only if ICMP modifications are enabled in the stack configuration.

-

FLG_RTE_PROXYPUB – Reply to ARP with client’s MAC address

This flag indicates that the router is a proxy publisher of another entity’s
MAC address. When set, the ARP protocol will respond to ARP requests
for the route’s IP address with the supplied static MAC address when the
host is on the same IF device as the incoming ARP request. This allows
support of hosts that do not implement ARP but are on the same physical
Ethernet network (as if this is going to happen). PROXYPUB entries are
always created with an LLA (link-layer address), and contain a static LLI
(link-layer info, i.e., ARP entry). (Note: PROXY and PROXYPUB have
nothing in common other than the word PROXY in their name.)

Note: This flag will be very rarely specified (if at all).

-

FLG_RTE_PROXY – Reply to ARP with router’s MAC address

This flag indicates that the router is acting as a proxy for this host or net-
work route. When set, the ARP protocol will respond to ARP requests for
the associated IP host or network when the network appears on a IF de-
vice which is different from that of the incoming ARP request. The MAC
address supplied in the reply is the MAC of the IF device on which the ARP
request was received. A PROXY entry has no LLI (link-layer info, i.e., ARP
entry). This technique is used to “trick” clients into sending packets to the
router when subnets are split across physical devices on a router. (Note:
PROXY and PROXYPUB have nothing in common other than the word
PROXY in their name.)

Note: This flag will be very rarely specified, and is only useful when the
stack is acting as a router. One potential use applies when the stack is act-
ing as a PPP server and a PPP client is made part of the same IP subnet as
an Ethernet based interface. Here, the stack acts as the PPP client’s proxy

Summary of Contents for TMS320C6000





















































































































































































































































































Reviews:

No comments

Related manuals for TMS320C6000

Hach SC1500 User Manual preview
SC1500
Brand: Hach Pages: 86
UCS CAT Quick Start Manual preview
CAT
Brand: UCS Pages: 4
York CIW01 Installation & Maintenance Manual preview
CIW01
Brand: York Pages: 24
SOMFY Situo 1 RTS Manual preview
Situo 1 RTS
Brand: SOMFY Pages: 4
PENKO 1020 CAN-RS232-RS422 MFL Manual preview
1020 CAN-RS232-RS422 MFL
Brand: PENKO Pages: 29
NXP Semiconductors Freescale Xtrinsic LFSTBEB865X Quick Start Manual preview
Freescale Xtrinsic LFSTBEB865X
Brand: NXP Semiconductors Pages: 2
Stramatel SC24 AUTONOM Operating Instructions Manual preview
SC24 AUTONOM
Brand: Stramatel Pages: 10
G-Tech FIELD MATE User Manual And Installation Manual preview
FIELD MATE
Brand: G-Tech Pages: 26
Patton SmartNode 5501 User Manual preview
SmartNode 5501
Brand: Patton Pages: 56
Haiwell S04AI User Manual & Application Case preview
S04AI
Brand: Haiwell Pages: 18
Progeny Crystal.PoE V4 Manual preview
Crystal.PoE V4
Brand: Progeny Pages: 4
Warner Electric CBC-150 Series Installation And Operation Manual preview
CBC-150 Series
Brand: Warner Electric Pages: 4
Inkbird ITC-1000F User Manual preview
ITC-1000F
Brand: Inkbird Pages: 10
Trio MC508 P848 Quick Start Manual preview
MC508 P848
Brand: Trio Pages: 8
thomann Botex DMX RDM Tester User Manual preview
Botex DMX RDM Tester
Brand: thomann Pages: 80
Native Instruments komplete kontrol s series Manual preview
komplete kontrol s series
Brand: Native Instruments Pages: 338
Galletti CSW 186 Manual preview
CSW 186
Brand: Galletti Pages: 8
Nanite systems DAX/2 Instructions Manual preview
DAX/2
Brand: Nanite systems Pages: 41

Brands by name

Popular brands

Load more brands