manualshive.com logo in svg

Texas TMS320C6000, Programmer'S Reference Manual

The Texas TMS320C6000 Programmer's Reference Manual is a comprehensive and indispensable resource for users of this advanced DSP platform. This manual provides detailed information and guidance on utilizing the TMS320C6000's features efficiently. Download your free copy now from manualshive.com to unlock the full potential of this powerful technology.

Share
Download
background image

Route Object

 

A-38

so that Ethernet peers can communicate via ARP. An alternative would be
to assign an alternate subnet to PPP clients.

-

FLG_RTE_CLONING – “Cloning” route to a local IP subnet

When set, indicates that the network route is a cloning route. Cloning
routes clone (spawn to) host routes when a route search is performed on a
host address that is a member of the cloning route’s network (via address
and subnet mask). Cloned host routes take on most of the properties of
their parent network route, with the following alterations:

J

Any MODIFIED or DYNAMIC flags are cleared.

J

The STATIC flag is never set.

J

The HOST flag is set and the netmask is set to 1s.

J

The CLONING flag is cleared.

Note: Cloning routes are routes to a “network” (IP and subnet). These
routes are added automatically when an IP network is added to a device
via a Bind object. Take care when adding this type of route manually.

-

FLG_RTE_HOST – Host route (no subnet mask)

When set, indicates that the route entry is a host route. A host route has no
subnet mask (or rather a subnet mask of all 1s). When searching for a
route, host routes always match before network routes (but this behavior
can be overridden).

-

FLG_RTE_GATEWAY – Destination is available via a Gateway

When set, indicates that the host or network route is indirectly accessible
via an IP gateway. For a route with this flag set, the GateIP address is al-
ways valid. Most GATEWAY routes will also be network routes, however a
host redirect from ICMP can create a host route with a different gateway
than its parent route. When searching for a route, gateway routes always
match before host routes (but this behavior can be overridden).

-

FLG_RTE_IFLOCAL – IP address is Local to the stack

When set, indicates that the host route does not have a valid LLI (ARP)
entry because the host is local to the stack. The MAC address of this local
IP host address can be obtained from the interface handle associated with
the route.

Note: Local routes are in the routing table to route packets that originate in
the stack’s upper layers. When handling ARP requests and routing of in-
coming packets from outside the stack, the IP address list published via
the Bind object is used. ARP will not respond to, nor IP accept packets ad-
dressed to an IP address which is not in the Bind list, even if an IFLOCAL
address entry exists in the route table. As with a cloning route, the Bind
object is the best way to create a local route.

Summary of Contents for TMS320C6000





















































































































































































































































































Reviews:

No comments

Related manuals for TMS320C6000

Samsung DMS2.5 Service Manual preview
DMS2.5
Brand: Samsung Pages: 32
Daikin ALTHERMA User Manual preview
ALTHERMA
Brand: Daikin Pages: 5
xpr VPROX2-M User Manual preview
VPROX2-M
Brand: xpr Pages: 4
Watt Stopper MRDS10 Installation Instructions preview
MRDS10
Brand: Watt Stopper Pages: 3
KEPCO MST 488-27HT Operator'S Manual preview
MST 488-27HT
Brand: KEPCO Pages: 34
Danfoss AK-CC 750 series Manual preview
AK-CC 750 series
Brand: Danfoss Pages: 96
EuroLite DMX LED EASY Operator Deluxe User Manual preview
DMX LED EASY Operator Deluxe
Brand: EuroLite Pages: 16
Taconova TACOTHERM FRESH PETA ES 5941S Manual preview
TACOTHERM FRESH PETA ES 5941S
Brand: Taconova Pages: 40
Watlow DB10-02C0-0000 User Manual preview
DB10-02C0-0000
Brand: Watlow Pages: 12
Advantech ADAM-5511 Manual preview
ADAM-5511
Brand: Advantech Pages: 340
Id Quantique SWISS QUANTUM+ Time Controller Series User Manual preview
SWISS QUANTUM+ Time Controller Series
Brand: Id Quantique Pages: 92
Trimteck OPTIMUX OpTK Product Instruction Manual preview
OPTIMUX OpTK
Brand: Trimteck Pages: 8
Omron Q2A Series Manual preview
Q2A Series
Brand: Omron Pages: 26
VDC Electronics BatteryMINDer SCC515 Instruction Manual preview
BatteryMINDer SCC515
Brand: VDC Electronics Pages: 8
Spica Door Cloud Zone spot Quick Connection Manual preview
Door Cloud Zone spot
Brand: Spica Pages: 2
IAI SCON-CGAL First Step Manual preview
SCON-CGAL
Brand: IAI Pages: 5
Hobbywing Ezrun MAX8 Instructions preview
Ezrun MAX8
Brand: Hobbywing Pages: 4
OEZ SM253 Series Instructions For Use preview
SM253 Series
Brand: OEZ Pages: 4

Brands by name

Popular brands

Load more brands