manualshive.com logo in svg

Texas TMS320C6000, Programmer'S Reference Manual

Share
Download
Texas TMS320C6000 Programmer'S Reference Manual Download Page 101

Configuration Specification

 

4-34

When Tag is CFGTAG_IP, the value of Item can be one of the following:

CFGITEM_IP_ICMPDOREDIRECT

Add route on ICMP redirect
(1=Yes)

CFGITEM_IP_ICMPTTL

TTL for ICMP messages
(RFC1700 says 64)

CFGITEM_IP_ICMPTTLECHO

TTL for ICMP echo
(RFC1700 says 64)

CFGITEM_IP_IPINDEXSTART

IP Protocol Start Index

CFGITEM_IP_IPFORWARDING

IP Forwarding Enable
(1=Yes)

CFGITEM_IP_IPNATENABLE

IP NAT Translation Enable
(1=Yes)

CFGITEM_IP_IPREASMMAXTIME

Max IP reassembly time in
seconds

CFGITEM_IP_IPREASMMAXSIZE

Max IP reassembly packet
size

CFGITEM_IP_RTCENABLEDEBUG

Enable route control dbg
messages (1=Yes)

CFGITEM_IP_RTCADVTIME

Time in sec to send Router
Adv. (0=don’t)

CFGITEM_IP_RTCADVLIFE

Lifetime of route in RtAdv if
active

CFGITEM_IP_RTCADVPREF

Preference of route in RtAdv
if active

CFGITEM_IP_RTARPDOWNTIME

Time 5 failed ARPs keeps
route down

CFGITEM_IP_RTKEEPALIVETIME

Timeout of validated route in
seconds

CFGITEM_IP_RTCLONETIMEOUT

Timeout of newly cloned
route in seconds

CFGITEM_IP_RTDEFAULTMTU

MTU for internal routes

CFGITEM_IP_SOCKTTLDEFAULT

Default IP TTL for Sockets

CFGITEM_IP_SOCKTOSDEFAULT

Default IP TOS for Sockets

CFGITEM_IP_SOCKMAXCONNECT

Max connections on listening
socket

CFGITEM_IP_SOCKTIMECONNECT

Max time for connect socket

CFGITEM_IP_SOCKTIMEIO

Default Max time for socket
send/rcv

CFGITEM_IP_SOCKBUFMAX

Absolute max socket buffer
size

CFGITEM_IP_SOCKMINTX

Default min tx space for
“able to write”

CFGITEM_IP_SOCKMINRX

Default min rx data for “able
to read”

Summary of Contents for TMS320C6000





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands