Tettex MIDAS 2881, Operating Instructions Manual

Page: 63 / 164

Software 53
“REN Password”
Here the user has to enter a password to set the system
into “Remote controlled” status (together with command
REN) from a remote location.
This is for safety reasons to ensure that nobody (without
the password) can accidentally take over control and
switch HV ON.
Button “Go To Local”
With this button the onsite user can set back a remote
controlled system (REN mode) into the local operation
mode (GTL mode).
Button “Button Setup Remote Interface”
Here can you set the interface for controlling 2820 by
remote. The 2820 can be controlled by LAN or by RS 232.
Be aware, that the set parameters of the interface
correspond with the host computer ones.
For communication with RS 232 please use a linked RS
232 cable.
This field displays information about the actual LAN
Settings (interface parameters).
PORT The port number used to remote control the
MIDAS
IP ADRESS Actual IP address of the MIDAS
SERVER NAME The actual computer name of the
MIDAS PC.
7.4.5 Menu Auxiliary
Here you can enter your own documentation. The title of each field can be changed. All titles and text
are shown in the printed document.