Tettex MIDAS 2881, Operating Instructions Manual

Page: 46 / 164

36 Software
Button “New”
By pressing this button the File Selector Dialog
pops up where you can enter a name for the
new file. All further measured data will be
stored in this file.
Button “New based on Template”
If this button is pressed the File Selector Dialog
pops up and a new test file can be generated
which will be based on an existent file. The
sequence data will be used from the source file,
the measuring data will be deleted. All further
operations will be stored in this file.
Button “Load”
By pressing this button a dialog pops up where
you can load an existent file to continue your
work.
Button “Save”
To save the actual test file press this button.
Button “Save As”
With this button the actual file can be saved with
a different filename.
Button “Report”
If this button is pressed the internet explorer
with the actual test file will open. There you can
print the file and configure the appearance of
the document.
See section ”Report“ for more information.
Button “ Previous Test(s)”
This button will load the shortcuts of the three
last used files and display them for quick
access.
7.2.1 File Selector Dialog
This common windows file selection window will appear when the button “New” or “New based on
Template” “Save” or “Save as” is pressed in the File Manager.