manualshive.com logo in svg

Tettex MIDAS 2881, Operating Instructions Manual

Share
Download
Tettex MIDAS 2881 Operating Instructions Manual Download Page 54

 

 

 

44  

Software

 

 

 

Menu Settings 

In this panel, you should enter the current measuring settings, such as 
cable length used, the parameters of an external capacitor connected 
and so on. 

See section “Menu Settings” for more information. 

 

Menu Options 

In this panel, you have the possibility to change the temperature unit 
(Celsius or Fahrenheit) and the languages. 

Currently the user interface is available in English and Chinese. 

 

Menu Auxiliary 

You can enter additional information for your special purpose in this 
panel. This information will be included when you print out the 
document. 

7.4.1

 

Menu DUT Info 

Information about the test object and test can be introduced using the computer keyboard. This information will 
be shown in the final report and exported to the CSV file. 

 

 

Summary of Contents for MIDAS 2881





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands