TESVOLT TS25, Installation Manual

Page: 27 / 34

12 TESVOLT Battery Monitoring (BatMon) software
12.1 Views and features of TESVOLT Battery Monitoring (BatMon) software
TESVOLT BatMon is a software program that can be used to analyze and visualize the battery at the cell level.
The software is provided on the USB stick included with delivery and must be installed in a writable folder, e.g. on drive “C:”,
before starting.
In order to use the BatMon software to gain insight into the battery, the LAN port on the APU must be connected to the DHCP
network. Once installation is complete, run the “BatMon.exe” file. The “Communication Port” button can be found in the
bottom section of the BatMon interface under the menu item “System”. Ethernet communication must be configured here and
the number of the APU must be entered subsequently under “Select APU”. The APU number can be found on a sticker affixed to
the underside of the APU.
If Ethernet communication has been properly configured and the connection to the battery is successful, a green spinning circle
will appear in the lower right corner of the BatMon interface alongside the indicator “online”.
25
www.tesvolt.com E.IA. .ENG- TS A.11