Tesla TT26X71-0932IA, User Manual

Page: 13 / 270

13
ENG
Self-clean function
Timer function
8°C heating function
Press OPTION at the fist time , select the CLEAN by pressing the
button or until symbol CLEAN is flashing; Press OPTION again to
activate the CLEAN function, and
appears on the display. Do it
again to deactivate this function.
For timer on, before proceeding with the time: Switch the conditioner
off (with the key
). program the working mode with the button
MODE
and the fan speed with the button
FAN
.
Timer setting/change/cancel:
1. Press
OPTION
at the fist time, select the Timer by pressing the
button or until symbol TIMER is flashing;
2. Press OPTION again, the data symbol like and TIMER will
be flashing;
3. To set the timer orchange the timer :
(1) Press the button or to set the expected timer (Increase or
decrease at half-hour intervals) the symbols and
TIMER both are
flashing.
(2) Press
OPTION or wait for 5 seconds without any operation
to confirm the timer, the pre-setting timer like and symbol
will be on the display.
To cancel the timer (if TIMER is on)
Press OPTION or wait for 5 seconds without any operation to
cancel the timer .
Note: All processing should be operated in 5 seconds, otherwise the
processing will be cancelled.
1. Press OPTION at the first time, select the 8 ° C H by pressing the button or until symbol 8 ° C H is flashing;
Press OPTION again to activate the 8 ° C heating function, and appears on the display. Do it again or
change the mode to deactivate this function.
2. This function enable the setting temperature 8 ° C when heating.
1. This function help carry away the accumulated dirt, bacteria, etc from the evaporator.
2. This function will run about 30 minutes, and it will return to the pre-setting mode .You can press
or MODE
to cancel this function during the process. You will hear 2 beeps when it’s finished or cancelled.
3. It’s normal if there are some noise during this function process, as plastic materials expand with heat and
contract with cold.
4. We suggest operate this function as the following ambient condition to avoid certain safety protection
features.
Indoor unit Temp<30 ° C
Outdoor unit 5 ° C <Temp<30 ° C
5. We suggest operate this function per 3 months.
Switch off the air conditioner.
To set the automatic switch-on /off of the air conditioner
Only can be set in Heating mode
Figure 1
Timer-on
when switch off
Figure 2
Timer-off
when switch on