Tescom TC-3000C, User Manual

Page: 96 / 128

88
Low Energy Command List
7. READ:LE_RFTC:IBE_2M:SWP_NUM?
○
Definition: Read the test sweep count.
8. CONF:LE_RFTC:IBE_2M:SWP_NUM <Value>
○
Definition: Set up the test sweep count.
○
Value: 10 (Default)
9. READ:LE_RFTC:IBE_2M:P_TX?
○
Definition: Read the power for the reference frequency.
5.2.5 Modulation Characteristics(MOD) Command
5.2.5.1 Modulation Characteristics(MOD) Command
1. EXEC:LE_RFTC:MOD:RUN
○
Definition: Start the test.
2. EXEC:LE_RFTC:MOD:STOP
○
Definition: Stop the test.
3. READ:LE_RFTC:MOD:CH?
○
Definition: Read the channel received by the tester. (Transmission channel of DUT)
4. CONF:LE_RFTC:MOD:CH <Value>
○
Definition: Set up the channel received by the tester. (Transmission channel of DUT)
○
Value: 0~39, 0-19-39 (Default)
5. READ:LE_RFTC:MOD:PLD_LEN?
○
Definition: Read the length of payload’s data.
6. CONF:LE_RFTC:MOD:PLD_LEN <Value>
○
Definition: Set up the length of payload's data.
○
Value: 0~255, 37 (Default)
7. READ:LE_RFTC:MOD:PACK_NUM?
○
Definition: Read the number of packets tested.
8. CONF:LE_RFTC:MOD:PACK_NUM <Value>
○
Definition: Read the number of packets tested.
○
Value: 10 (Default)
9. READ:LE_RFTC:MOD:DF1_AVG?
○
Definition: Read the average of Δf1 measurement.