Tescom TC-3000C, User Manual

Page: 81 / 128

Test Items
73
4.3 Test Items
4.3.1 Output Power
1. Objective: To measure the average and maximum power of DUT
Since the Advertising mode conducts tests in advertising packet, the test result may differ from
the test done in Direct Test or Non-Signaling Test.
2. Set up parameters.
Parameter DUT TC-3000C
BT Channels 0-12-39
Payload Length(octets) 0 ~ 255
Number of packets 1
3. Measurement Method
A. In the test case of TC-3000, select the output power and press key .
B. Set up TC-3000C similar to the setting done in Step 2.
C. Set DUT to send TX signal to the Advertising Channel.
D. On TC-3000C, select to start the test.
E. After the test, measure the average and maximum power of the packet sent by DUT from
TC-3000C and judge Pass/Fail.