Tescom TC-3000C, User Manual

Page: 60 / 128

52
Test Items
3.3 Test Items
3.3.1 Transmitter Tests (TP/TRM-LE)
3.3.1.1 Output Power
(TP/TRM-LE/CA/BV-01-C) Output Power
1. Objective: To measure the average and maximum power of DUT
2. Settings on DUT
■
Payload : PRBS9 / MAX_TX_LENGTH
■
DUT TX Power : Maximum power
3. Settings on Tester
In the Non-Signaling test, it is difficult to test multiple channels (for example, 0-19-39) at the
same time when setting up BT channels. Setting up and testing each channel are
recommended.
4. Measurement Method
A. By using the Test Control Software provided by the Chip vendor, set the BT LE Channel,
Packet Length, and Payload Type, and then have DUT send LE standard Packets. Set
“PRBS9” for the DUT packet type.
B. In the test case of TC-3000, select the output power and press key.
C. Set TC-3000C with the same BT channel set for DUT in A.
D. On TC-3000C, select to start the test.
E. After the test, check the test result on TC-3000C.