Tescom TC-3000C, User Manual

Page: 121 / 128

Low Energy Command List
113
○
Value: 1500 (Default)
9. READ:LE_RFTC:PRI_2M_SMI:RX_LEV?
○
Definition: The receiving end of DUT reads the reception power in 0.01dBm unit. (TX power of
the tester)
10. CONF:LE_RFTC:PRI_2M_SMI:RX_LEV <Value>
○
Definition: The receiving end of DUT sets up the reception power in 0.01dBm unit. (TX power
of the tester)
○
Value: -30 (Default)
11. READ:LE_RFTC:PRI_2M_SMI:PER?
○
Definition: Read the Packet Error Rate (PER).
12. READ:LE_RFTC:PRI_2M_SMI:PACK_SENT?
○
Definition: Read the number of packets sent by the tester for the PER test.
○
Value: 1500 (Default)
13. READ:LE_RFTC:PRI_2M_SMI:PACK_RCVD?
○
Definition: Read the number of packets normally received among the packets sent by the tester.
5.2.9.5 PER Report Integrity, LE Coded (S=2) (PRI_CS2) Command
1. EXEC:LE_RFTC:PRI_CS2:RUN
○
Definition: Start the test.
2. EXEC:LE_RFTC:PRI_CS2:STOP
○
Definition: Stop the test.
3. READ:LE_RFTC:PRI_CS2:CH?
○
Definition: Read the channel received by the tester. (Transmission channel of DUT)
4. CONF:LE_RFTC:PRI_CS2:CH <Value>
○
Definition: Set up the channel received by the tester. (Transmission channel of DUT)
○
Value: 0~39, 0-19-39 (Default)
5. READ:LE_RFTC:PRI_CS2:PLD_LEN?
○
Definition: Read the length of payload’s data.
6. CONF:LE_RFTC:PRI_CS2:PLD_LEN <Value>
○
Definition: Set up the length of payload's data.
○
Value: 0~255, 31 (Default)
7. READ:LE_RFTC:PRI_CS2:PACK_NUM?