Tescom TC-3000C User Manual Download Page 7

Page: 7 / 128

vii

4.3.1 Output Power

4.3.2 Carr freq Mod char (preamble)

4.4

Use of Measurement

PART 3.

Programming Guide

5.1

Basic Guide to RS-232C Commands

5.1.1 RS-232C Connection Method

5.1.2 RS-232C Setup Method

5.1.3 RS-232C Connection Status Checking Method

5.1.4 Notes on RS-232C Commands

5.2

Low Energy Command List

5.2.1 Configuration Command

5.2.2 Output Power(OP) Command

5.2.3 In-band Emissions(IBE) Command

5.2.4 In-band Emissions(IBE_2M) at 2Ms/s Command

5.2.5 Modulation Characteristics(MOD) Command

5.2.5.1 Modulation Characteristics(MOD) Command

5.2.5.2 Stable Modulation Characteristics, uncoded data at 1Ms/s (MOD_SMI) Command

5.2.5.3 Modulation Characteristics at 2Ms/s (MOD_2M) Command

5.2.5.4 Stable Modulation Characteristics at 2Ms/s (MOD_2M_SMI) Command

5.2.5.5 Modulation Characteristics, LE Coded (S=8) (MOD_CS8) Command

5.2.6 Carrier Firquency Offset and Drift(CFOD) Command

5.2.6.1 Carrier frequency offset and drift, uncoded data at 1 Ms/s (CFOM) Command

5.2.6.2 Carrier frequency offset and drift, LE Coded (S=8) (CFOD_CS8) Command

5.2.7 Sensitivity(SENS) Command

5.2.7.1 Receiver sensitivity, uncoded data at 1 Ms/s (SENS)

5.2.7.2 Receiver sensitivity, at 2 Ms/s (SENS_2M)

5.2.7.3 Receiver sensitivity, uncoded data at 1Ms/s, Stable Modulation Index (SENS_UC_SMI)

5.2.7.4 Receiver sensitivity at 2Ms/s, Stable Modulation Index (SENS_2M_SMI)

5.2.7.5 Receiver sensitivity, LE Coded (S=2) (SENS_CS2)

5.2.7.6 Receiver sensitivity, LE Coded (S=8) (SENS_CS8)

5.2.7.7 Receiver sensitivity, LE Coded (S=2), Stable Modulation Index (SENS_CS2_SMI)

5.2.7.8 Receiver sensitivity, LE Coded (S=8), Stable Modulation Index (SENS_CS8_SMI)

5.2.8 Maximum Input Signal Level(MISL) Command

5.2.8.1 Maximum input signal level, uncoded data at 1Ms/s (MISL)

5.2.8.2 Maximum input signal level at 2Ms/s (MISL_2M)

5.2.8.3 Maximum input signal level, uncoded data at 1Ms/s, Stable Modulation Index (MISL_UC_SMI)

5.2.8.4 Maximum input signal level at 2Ms/s, Stable Modulation Index (MISL_2M_SMI)

5.2.9 PER Report Integrity(PRI) Command

5.2.9.1 PER Report Integrity, uncoded data at 1 Ms/s(PRI) Command

5.2.9.2 PER Report Integrity at 2Ms/s (PRI_2M) Command

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . 75

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

. . . . . . . . . . . . . . . . . . 102

. . . . . . . . . . . . . . . . . . 103

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

. . . . . . 106

. . . . . . . . . . . . . . . . . 107

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

Summary of Contents for TC-3000C

































































































































Search results

Summary of Contents for TC-3000C

Reviews:

Related manuals for TC-3000C

Brands by name

Popular brands

Tescom TC-3000C, User Manual

Search results

Summary of Contents for TC-3000C

Reviews:

Related manuals for TC-3000C

Brands by name

Popular brands