Tescom TC-3000C, User Manual, Page: 53 / 128

3. Non-Signaling Test
45
For chips that do not support the Direct Test mode, the user can conduct a non-signaling test by sending
packets to DUT or reporting the received packets using the chip vendor-provided software and using
TC-3000C for the test.
DUT’s TX Test (Test for DUT’s transmitting efficiency)
By using the Test Control Software provided by the Chipset company, set DUT to transmit the LE
packet required for test and measure DUT’s TX efficiency with TC-3000.
DU’s RX Test (Test for DUT’s receiving efficiency)
TC-3000 sends the LE standard packet to DUT, which then reports the number of packets received
normally using the Test Control Software provided by the Chipset company.