Tescom TC-3000C, User Manual

Page: 54 / 128

46
Set up
3.1 Set up
3.1.1 General Non-Signaling Test Setup
●
DUT Preparation : Depending on DUT, use the test control software provided by the Bluetooth chip
vendor or use the terminal to enter the test mode. In test mode, the user can set up the channels to
measure, packet lengths, packet count, and bit pattern.
●
Shield Box : For reliable measurement report, use a shield box to prevent electromagnetic
interferences. Depending on the DUT type, directly connect using the RF cable or create a radiation
environment using the antenna coupler.
●
TC-3000C : TC-3000C displays the measurement result on the front LCD window.
●
Control PC : For DUT control, connect DUT to PC and run the test control software provided by the
chip vendor.
3.1.2 TC-3000C Setup
1. BT LE Mode Setup
○
Select MENU -> Configuration -> DUT(M2) -> DUT Type(F2) -> BT LE
2. HCI Port Setup: For the Non-Signaling test, set the HCI port to None
○
Select MENU -> Configuration -> DUT(M2) -> (F3) -> None
3. Path Loss Setup
○
Menu -> Configuration -> DUT (M2) -> Path Loss (F7)