Terex Genie S-60 DC, Service And Repair Manual

Page: 58 / 171

Service and Repair Manual July 2021
Manifolds
46 S ® -60 DC • S ® -60 FE Part No. 1299608GT
8-1
Function Manifold Components
The function manifold is mounted to the turntable next to the ground controls.
Index
No. Description
Schematic
Item
Function Torque
1 Valve, Proportional Relief TS1 System relief 19-21 ft lbs / 26-29 Nm
2 Solenoid valve, 2 position 2 way
(normally open)
SV2 P HI circuit enable 19-21 ft lbs / 26-29 Nm
3 Solenoid valve, 2 position 2 way
(normally open)
SV3 P LO circuit enable 19-21 ft lbs / 26-29 Nm
4 Spool valve, 3 position 4 way SP5 Primary boom up/down 19-30 ft lbs / 26-41 Nm
5 Spool valve, 3 position 4 way SP6 Primary boom extend/retract 19-30 ft lbs / 26-41 Nm
6 Proportional solenoid valve,
3 position 4 way
SP3 Turntable rotate left/right 19-30 ft lbs / 26-41 Nm
7 Spool valve, 3 position 4 way SP2 Platform level up/down 19-30 ft lbs / 26-41 Nm
8 Spool valve, 3 position 4 way, closed
center
SP1 Steer left/right 16-20 ft lbs / 24-27 Nm
9 Relief valve, 2000 psi RV3 Boom extend relief 33-37 ft lbs / 45-50 Nm
10 Relief valve, 3000 psi RV1 Platform level up 33-37 ft lbs / 45-50 Nm
11 Relief valve, 3000 psi RV2 Platform level down 33-37 ft lbs / 45-50 Nm
12 Sequence valve RV4 Oscillate 24-26 ft lbs / 33-35 Nm
13 Proportional solenoid valve TS2 Oscillate circuit 24-26 ft lbs / 33-35 Nm
14 Shuttle valve LS2 Extend/retract regenerative
circuit
19-21 ft lbs / 26-29 Nm
15 Shuttle valve LS1 Turntable rotate 4-5 ft lbs / 5-7 Nm
16 Check valve, 10 psi CV4 P LO circuit 19-21 ft lbs / 26-29 Nm
17 Check valve CV2 Platform rotate/jib boom select 19-21 ft lbs / 26-29 Nm
18 Check Valve, pilot operated DC1 Platform level 19-21 ft lbs / 26-29 Nm