Terex Genie S-60 DC, Service And Repair Manual

Page: 28 / 171

Service and Repair Manual July 2021
Platform Controls
16 S ® -60 DC • S ® -60 FE Part No. 1299608GT
8 Momentarily activate the drive enable toggle
switch in the right direction until CALIBRATE
TILT SENSOR is shown on the display.
9 Momentarily activate steer in the right
direction until VALVE THRESHOLD
CURRENT is shown on the display.
Joystick Controlled Functions:
10 Press down on the foot switch and slowly
deflect the joystick to be adjusted until the
valve is operating at the desired threshold
current.
Result: The display will indicate the threshold
current parameter in milliamps while operating
the function.
11 While operating the function and the function
is barely moving, momentarily activate the
drive enable toggle switch in the right
direction to save the desired value.
Result: The alarm will sound indicating the
setting has been saved. Release the foot
switch. Continue to the next threshold current
adjustment.
Switch Controlled Functions:
12 Perform steps 1 through 9 to enter the sub
menu THRESHOLD CURRENT on the
display.
13 Momentarily activate the speed select toggle
switch in either direction until the bar graph
is at about 50% on the display.
14 Press down on the foot switch and select the
toggle switch controlled boom function to be
adjusted.
Result: The display will indicate the parameter
in milliamps while operating the function.
15 Momentarily activate the speed select switch
in either direction while operating the function
(foot switch depressed) to achieved the
desired threshold value. Do not release the
foot switch.
16 Momentarily activate the drive enable toggle
switch in the right direction to save the value.
Result: The alarm will sound indicating the
setting has been saved. Release the foot
switch. Continue to the next threshold current
adjustment.
To exit programming mode:
17 Move and hold the drive enable toggle in the
left position until the display returns to
SYSTEM READY mode.