Tennant 7400 Operator'S Manual Download Page 39

Page: 39 / 92

OPERATION

7400 (GM) 330970 (3--05)

4. CONVENTIONAL SCRUBBING: Adjust the

solution flow to the floor as needed. See the

SOLUTION SWITCH (WITHOUT FaST)

section of the manual.

5. Press the scrub switch to start the scrubbing

operations.

WARNING: Flammable materials or

reactive metals can cause an explosion

or fire. Do not pickup.

As long as the machine is not in reverse, the

scrub head will lower and the scrub brushes

will start. The rear squeegee will

automatically lower and the vacuum fan will

start. The solution flow will start, if the

solution flow switch is on. The optional side

brush will lower and turn on, if the switch is

on. Also, the optional ES system and

detergent pump will start, if the switches are

on. The engine speed will change to (Fast).

10897

Summary of Contents for 7400





























































































Search results

Summary of Contents for 7400

Reviews:

Related manuals for 7400

Brands by name

Popular brands

Tennant 7400, Operator'S Manual

Search results

Summary of Contents for 7400

Reviews:

Related manuals for 7400

Brands by name

Popular brands