Tennant 7400 Operator'S Manual Download Page 36

Page: 36 / 92

OPERATION

7400 (GM) 330970 (12--03)

Polypropylene side scrub brush

-- A

general-purpose brush with stiff bristles for

aggressive action on slightly compacted soilage.

Works well on concrete, wood, and tile surfaces.

Nylon side scrub brush

-- Recommended for

scrubbing coated floors. Cleans without scuffing.

Super abrasive bristle side scrub brush

Nylon fiber impregnated with abrasive grit to

remove stains and soilage. Strong action on any

surface, performing well on buildup, grease, or tire

marks.

FILLING THE TANKS

1. Start the engine.

2. Drive the machine to the filling site.

3. Shut the engine off.

4. Set the parking brake.

FOR SAFETY: Before leaving or

servicing machine; stop on level

surface, set parking brake, turn off

machine and remove key.

Summary of Contents for 7400





























































































Search results

Summary of Contents for 7400

Reviews:

Related manuals for 7400

Brands by name

Popular brands

Tennant 7400, Operator'S Manual

Search results

Summary of Contents for 7400

Reviews:

Related manuals for 7400

Brands by name

Popular brands