OPERATION
7400 (GM) 330970 (3--05)
22
SOLUTION FLOW SWITCH (WITHOUT FaST)
The solution flow switch controls the flow of
solution to the floor. The solution flow switch is
only on machines without the FaST system.
Start (1): Place the solution flow switch in the
middle position. Use this flow rate for smooth
floors and light dirt.
Increase (2): Press the right of the solution flow
switch. Use this flow rate for rough floors and
heavy or compacted dirt.
Stop (0): Press the left of the solution flow switch.
NOTE: The solution flow starts, if the solution
flow switch is on, when the scrubbing operations
start.
SOLUTION FLOW SWITCH (FaST)
The FaST solution flow switch enables the FaST
(Foam Scrubbing Technology) system. When the
FaST system is enabled, it is turned on and off
with the FaST switch. Disable the FaST system
before using the machine for conventional
scrubbing.
For machines with the FaST system, the FaST
solution flow switch controls the flow of solution to
the floor.
Start (1): Place the FaST solution flow switch in
the middle position. Use this flow rate for smooth
floors and light dirt.
Increase (2): Press the top of the FaST solution
flow switch. Use this flow rate for rough floors and
heavy or compacted dirt.
Stop (0): Press the bottom of the FaST solution
flow switch.
FaST SWITCH
The FaST switch enables the FaST (Foam
Scrubbing Technology) system. When the FaST
system is enabled, it is turned on and off with the
FaST switch. Disable the FaST system before
using the machine for conventional scrubbing.
Disable FaST for conventional scrubbing: Press
the bottom of switch to the
FaST system off
position.
Enable the FaST system: Press the top of switch
to the
FaST system on
position.
NOTE: The FaST system will not start until the
directional pedal is pressed.
