OPERATION
186 MM159 (6–94)
2Ć12
TO SWEEP
Plan the sweeping in advance. Try to arrange long
runs with minimum stopping and starting. Sweep
debris from very narrow aisles into main aisles
ahead of time. Do an entire floor or section at one
time.
Pick up oversize debris before sweeping. Flatten
or remove bulky cartons from aisles before
sweeping. Pick up pieces of wire, twine, string,
etc., which could become entangled in brush or
brush plugs. Overlap brush paths.
Sweep as straight a path as possible. Avoid
bumping into posts or scraping the sides of the
sweeper.
1. Move the main brush lever into the (Main
Brush Down) or (Main Brush Free-Float)
position.
2. Move the side brush arm into the down
position.
3. Sweep as required.
TO DUMP HOPPER
1. Pull the main brush lever into the (Main
Brush Up) position.
2. Pull the side brush arm into the raised
position.
3. For machines below serial number 004369:
Push the filter shaker switch for 15 seconds
to shake the dust filter.
NOTE: For machines serial number 004369 and
above, the filter shaker by-pass switch must be in
the “on” position to shake the dust filter when the
engine is turned off.
4. Slowly drive the machine up to the dump
site or dumpster. Stop the engine.
5. Park on level surface.
FOR SAFETY: Before Leaving Or Servicing
Machine; Stop On Level Surface, Set Parking
Brake, And Turn Off Machine.
6. Lift the filter cover.
7. Swing the dump lever under the hook; Lift
the dump lever to dump the hopper.
WARNING: Heavy Hopper. Get Help To
Handle.
A
B
03142
DUMPING HOPPER
A. Hopper
B. Dump Lever
8. Engage the lever hook to keep the hopper in
the dump position.
9. Slowly back the machine away from the
dump site or dumpster.
10. Release the lever hook, lower the hopper,
and return the dump lever to its storage
location.
POST OPERATION CHECKLIST – ENGINE
OPERATING
Check brush pattern for width and evenness.
TO STOP MACHINE
1. Raise the main brush and side brush.
2. Turn the on-off switch key to the left.
Remove the key from the on-off switch.
FOR SAFETY: Before Leaving Or Servicing
Machine; Stop On Level Surface, Set Parking
Brake, And Turn Off Machine And Remove
Key.
3. LPG powered machines: Close the LPG
tank liquid service valve.
Summary of Contents for 186
