MAINTENANCE
186 MM159 (6–94)
3Ć46
8. Position the rear squeegee blade on the
squeegee frame pins.
A
B
03163
INSTALLING SQUEEGEE BLADE
A. Squeegee Frame
B. Rear Squeegee Blade
9. Position the squeegee backup strip over the
rear squeegee with the long side down.
A
B
03164
INSTALLING BACKUP STRIP
A. Rear Squeegee Blade
B. Backup Strip
10. Position the stationary cam and the retention
band over the backup strip.
A
B
C
03165
POSITIONING STATIONARY CAM
A. Rear Squeegee Blade
B. Retention Band
C. Stationary Cam
11. Position the levered cam on the squeegee
retention band with the lever down.
A
B
C
00933
INSTALLING LEVERED CAM
A. Rear Squeegee Blade
B. Levered Cam
C. Retention Band
12. Pull the levered cam lever up to tighten the
rear squeegee in place.
NOTE: The cam lever should be above the
horizontal axis to keep from possibly scratching
the floor. If the levered cam is too loose to clamp
the squeegee blade, rotate the stationary cam to
the next flat edge and retighten the levered cam.
Overtightening the levered cam may damage the
squeegee frame and retention band.
Summary of Contents for 186
