where
x = 0, Call Waiting tone is disabled (default TLS-5A/5B)
x = 1, Call Waiting single tone only 300 ms (default TLS-5C/D)
x = 2, Call Waiting tone for local calls is single tone and a double
tone for long distance calls (the number dialed was greater than 7
digits). (TLS-5C/D only)
The TLS-5 supports the ability to Cancel Call Waiting on a per call basis by
dialing *70 prior to dialing a telephone number. The TLS-5 will not support
the ability to dial *70 in conjunction with any of the special Caller ID codes
(*67, *87, or *88), or the Visual Message Waiting codes (*50, *51).
The Call Waiting tone is a 300 ms burst of 440 Hz. The distinctive Call Waiting
tone is a 100 ms on/off/of burst of 440 hz (TLS-5C/D only). The connection to
the far end caller will be interrupted for a maximum of 400 ms, so that they do
not hear the Call Waiting tone. If a call is waiting, and the active caller goes
on-hook, the TLS-5 will send ringing to the on-hook phone.
50:
Caller ID Type
This feature is programmed for the called line which will transmit the Caller
ID message to the answering device. Please read Compatibility with Caller ID
Devices in Chapter 2.
*
50#x#
where:
x=0, no Caller ID
x=1, Caller ID in single message format (calling number only)
x=2, Caller ID in multiple message format (calling number, name,
date, and time)
(default)
·
To turn Caller ID off, enter:
*
50#0#
·
To turn Caller ID on in single message format, enter:
*
50#1#
·
To turn Caller ID on in multiple message format
(default)
, enter:
*
50#
2#
51:
Select Caller ID Name
This feature enables you to select a variety of names that can be associated
with each line to simulate Caller ID information. If you wish to change the
default names, see x=2, below.
*51#x#
where:
x=0, Fixed names from memory (EEPROM) for each line
line 1 = CLINTON BOB
line 2 = REAGAN RICK
line 3 = CARTER JOHNNY
line 4 = FORD GARY
Chapter 6: Programming
40-400-00003, Rev.
E
Page 53
