manualshive.com logo in svg

Teltone TLS-5A, User Manual, Page: 41 / 76

Share
Download
Teltone TLS-5A User Manual Download Page 41

Command Dictionary

With this table, commands are listed in numerical order, split between System
Wide commands, and Per Line Commands.  The description provides
information explaining the basic use of each command. In-depth explanations
are provided in the text on the indicated page.

There are two types of programming commands: system wide and per-line.
commands 00 through 09, 69, 71, and 72 are system wide and can be entered
with any line selected and with the unit in programming mode. All other
commands are per-line-programmable features;  all commands entered for the
Line selected (Line 1 when entering the Program mode) until another line is
selected.

Appendix C provides a quick reference list of commands.

The Model Number column indicates which version supports the command.

Command

Number

Command

Description

Model #

Systemwide Commands

**99##

Use this command to enter programming mode.

All

00

Reset to defaults

Use this command to erase programming and return to the original
settings.

There is no default for this command.

All

01

Program Line 1

Enter this command to program Line 1. After you enter this
command, you can enter others to change how Line 1 operates.

There is no default for this command.

All

02

Program Line 2

Enter this command to program Line 2.
There is no default for this command.

All

03

Program Line 3

Enter this command to program Line 3.

There is no default for this command.

All

04

Program Line 4

This command programs Line 4.

There is no default for this command.

All

05

Audio Access Mode

This command sets which mode the audio port will be in when you
access it and when you disconnect from it. There are three modes to
choose from: monitor, immediate access, and dial access.

The default is: dial access, one person can access the audio port at
a time, and disconnect at on-hook.

All

Chapter 6: Programming

40-400-00003, Rev. 

E

 Page 35

Summary of Contents for TLS-5A













































































Reviews:

No comments