70:
Caller ID Sequence
This command sets the sequence for the Caller ID transmission.
*70#x#
Where:
see table
NOTE:
The default sequence for the TLS-5A/B is different from the table. The
Private sequence is date, reason for no number. The Out-of-Area sequence
is date, reason for no number.
X
Order Transmitted
Normal Message
(No Dial Prefix)
Message with
Checksum error
(Dial Prefix = *88)
Private
(Dial Prefix = *67)
rn_num = reason for no number
rn_name = reason for no name
Out-of-Area
(Dial Prefix = *87)
rn-num = reason for no number
rn_name = reason for no name
0
date,number,name
date,number,name
date,rn_name,rn_num
date,rn_name,rn_num
1
date,name number
date,number,name
date,number,rn_name
date,number,rn_name
2
number,date,name
date,number,name
rn_num,name,date
rn_num,name,date
3
number,name,date
date,number,name
rn_name,number,date
rn_name,number,date
4
name,date,number
date,number,name
rn_num,date
rn_num,date
5
name,number,date
date,number,name
rn_name,date
rn_name,date
6
date only
date,number,name
date only
date only
7
number only
date,number,name
rn_num,name
rn_num,name
8
name only
date,number,name
rn_name,number
rn_name,number
9
name only
date,number,name
date,"P" in number field
date,"O" in number field
90:
Clone Line X
This command copies the features programmed for another line to the current
line.
Note:
When a line is cloned, Caller ID names and the line’s telephone
numbers (primary, secondary, dial tone/hot line) are
not
cloned.
·
To copy Line 1 programming to the current line, enter:
*
90#1#
·
To copy Line 2 programming to the current line, enter:
*
90#2#
·
To copy Line 3 programming to the current line, enter:
*
90#3#
·
To copy Line 4 programming to the current line, enter:
*
90#4#
Chapter 6: Programming
40-400-00003, Rev.
E
Page 55