Step 3:
Turn on player
·
Turn on the cassette recorder/player and press the RECORD button.
Step 4:
Lift handset
·
Lift the Line 1 telephone handset. The AUDIO light turns on.
Step 5:
Speak message
·
Speak the message, taking care that you do not pause for more than three
seconds before the end of the message.
Step 6:
End message
·
At the end of the message, pause for at least 3 seconds, then press any digit
key (0-9) or speak a word. If you wish to record the message more than
once, or make a series of recordings, pause briefly before beginning the
next message.
Playing a Message from the Audio Port
Follow these instructions to play a message through the TLS-5 audio port to a
line. This is the default mode,
Step 1 is only necessary if you have changed the
default settings.
Step 1:
Program audio port
Program the TLS-5 audio port as follows:
·
With a tone (DTMF) telephone connected to Line 1, lift the handset and
press the MAN/RING switch position until the Line 1 light blinks and you
hear a confirmation tone (three beeps).
Chapter 4: Operation
40-400-00003, Rev.
E
Page 25
Figure
2
Audio Port Connector Cable
