Telpar MTP7632, Programming Manual

Page: 18 / 97

Confidential MTP7632 Programming Manual
Telpar 800-872-4886 12 -
[Notes]
1 8-dot double-density 8 100 DPI 300 DPI nL + nH × 256
32 24-dot single-density 24 300 DPI 150 DPI ( nL + nH × 256) × 3
33,35 24-dot double-density 24 300 DPI 300 DPI ( nL + nH × 256) × 3
If the value of m is out of the specified range, nL and data following are
processed as normal data.
If the bit-image data input exceeds the number of dots to be printed on a line,
the excess data is ignored.
d indicates the bit-image data. Set a corresponding bit to 1 to print a dot or to
0 to not print a dot.
After printing a bit image, the printer returns to normal data processing
mode.
This command is not affected by print modes (emphasized, double-strike,
underline, character size or white/black reverse printing), except
upside-down printing mode.
The relationship between the image data and the dots to be printed is as
follows:
When 8-dot bit image is selected:
When 24-dot bit image is selected: