Telpar MTP7632, Programming Manual

Page: 9 / 97

Confidential MTP7632 Programming Manual
Telpar 800-872-4886 3 -
[Format]
[Description]
[Notes]
[Reference]
ASCII FF
Hex 0C
Decimal 12
Under page mode prints the data in the print buffer collectively and returns to
standard mode.
Under standard mode, this command functions the same as LF command.
The buffer data is deleted after being printed.
This command sets the print position to the beginning of the line.
ESC FF, ESC L, ESC S
CR
[Name]
[Format]
[Description]
[Notes]
[Reference]
Print and carriage return
ASCII CR
Hex 0D
Decimal 13
When automatic line feed is enabled, this command functions the same as LF ;
This command is disabled according to the printer configuration
When automatic line feed is disabled, this command is ignored.
LF
DLE EOT n
[Name] Real-time status transmission
[Format] ASCII DLE EOT n
Hex 10 04 n
Decimal 16 4 n
[Range] 2 ≤ n ≤ 7,9 ≤ n ≤ 11
[Description] Transmits the selected printer status specified by n in real-time,according to the following
parameters:
n = 2
：
Transmit peripheral equipment status
n = 3 ： Transmit error status.
n = 4 ： Transmit paper roll sensor status .
n = 5
：
Transmit printer status
（
Equal to first byte data of ASB
）
.
n = 6 ： Transmit printer status （ Equal to second byte data of ASB ） .
n = 7
：
Transmit printer status
（
Equal to third byte data of ASB
）
.
n = 9 ： Transmit PRST status.
n = 10 ： Reset printer
n = 11
：
Clear printer errors.(function as the clear errors command)
[Notes]
When n is out of range, the return value is invalid.