Telpar MTP7632, Programming Manual

Page: 30 / 97

Confidential MTP7632 Programming Manual
Telpar 800-872-4886 24 -
[Reference]
vertical motion unit]
The horizontal and vertical motion units are specified by GS P .
In standard mode, the horizontal motion unit is used.
In page mode, the horizontal or vertical motion unit differs as follows, depending on
the starting point of the printing area:
①  When the starting position is set to the upper left or lower right of the
printable area using ESC T , the horizontal motion unit (x) is used.
②  When the starting position is set to the upper right or lower left of the
printable area using ESC T , the vertical motion unit (y) is used.
ESC $, GS P
ESC a n
[Name]
[Format]
[Range]
[Description]
[Notes]
[Default]
Select justification
ASCII ESC a n
Hex 1B 61 n
Decimal 27 97 n
0 ≤ n ≤ 2, 48 ≤ n ≤ 50
Aligns all the data in one line to the specified position
n selects the justification as follows:
n Justification
0,48 Left justification
1, 49 Centering
2, 50 Right justification
The command is enabled only when processed at the beginning of the line in
standard mode.
If this command is input in page mode, the printer performs only internal flag
operations.
n = 0
[Example]
ESC c 0 n
[Name]
[Format]
Select paper type to be used
ASCII ESC c 0 n