Telpar MTP7632, Programming Manual

Page: 49 / 97

Confidential MTP7632 Programming Manual
Telpar 800-872-4886 43 -
[Default]
characters, and spacing skipped by HT , ESC $ , and ESC \ .
This command does not affect the space between lines.
Underline mode is disabled when White/black reverse mode is selected.
Otherwise it is enabled when white/black reverse mode is turned off.
n = 0
GS C 0 n m
[Name] Select counter print mode
[Format] ASCII GS C 0 n m
Hex 1D 43 30 n m
Decimal 29 67 48 n m
[Range] 0
≤
n
≤
5
0
≤
m
≤
2, 48
≤
m
≤
50
[Description] Select a print mode for the serial number counter
n specifies the number of digitals to be printed as follows
：
when n = 0,the printer prints the actual digits.
when n = 1 t 5,the printer prints the actual digits indicated by the number value.
ｍ specifies the printing position within the entire range of printer digits as follow:
ｍ
Printing position
Processing of digits less than
those specified
0,48 Align right Adds spaces to the left
1,49 Align right Adds 0 to the left
2,50 Align left Adds spaces to the right
[Notes] • If n or m out of the defined range, the previously set print mode is not changed.
• If
ｎ＝０
,
ｍ
does not have any meaning.
[Default] n = 0, m = 0
[Reference] GS C 1, GS C 2, GS C ;, GS c
[Examples]
GS C 1 aL aH bL bH n r
[Name] Select count mode (A)
[Format] ASCII GS C 1 aL aH bL bH n r