Telpar MTP7632, Programming Manual, Page: 47 / 97

Confidential MTP7632 Programming Manual
Telpar 800-872-4886 41 -
[Reference]
GS /
GS / m
[Name]
[Format]
[Range]
[Description]
[Notes]
Print downloaded bit image
ASCII GS / m
Hex 1D 2F m
Decimal 29 47 m
0 ≤ m ≤ 3, 48 ≤ m ≤ 51
Prints a downloaded bit image using the mode specified by m.
m selects a mode from the table below:
203DPI:
m Mode
Vertical Dot Density
(DPI)
Horizontal Dot
Density (DPI)
0, 48 Normal 203 203
1, 49 Double-width 203 101
2, 50 Double-height 101 203
3, 51 Quadruple 101 101
300DPI
m Mode
Vertical Dot Density
(DPI)
Horizontal Dot
Density (DPI)
0, 48 Normal 300 300
1, 49 Double-width 300 150
2, 50 Double-height 150 300
3, 51 Quadruple 150 150
This command is ignored if a downloaded bit image has not been defined.
This command has no effect in the print modes (emphasized, double-strike,
underline, character size, or white/black reverse printing), except for upside-down
printing mode.
The command sets the position after printing to the beginning of next line.
If the downloaded bit-image to be printed exceeds the printable area, the excess
data is not printed.
The command prints bit-images in RAM and not that in NV memory. The number