Telpar MTP7632, Programming Manual

Page: 57 / 97

Confidential MTP7632 Programming Manual
Telpar 800-872-4886 51 -
[Notes]
[Reference]
When m = 0 :
The macro executes r times continuously at the interval specified by t (t x 250
ms).
When m = 1:
After waiting for the period specified by t, the PAPER OUT LED indicators blink
and the printer waits for the FEED button to be pressed. After the button is
pressed, the printer executes the macro once. The printer repeats the
operation r times.
The waiting time is t × 250 ms for every macro execution.
If this command is received while a macro is being defined, the macro definition is
aborted and the definition is cleared.
If the macro is not defined or if r is 0, the command is disabled.
When the macro is executed (m = 1), paper always cannot be fed by using the
FEED button.
GS :
GS a n
[Name]
[Format]
[Range]
[Description]
[Notes]
Enable/Disable Automatic Status Back (ASB)
ASCII GS a n
Hex 1D 61 n
Decimal 29 097 n
0 ≤ n ≤ 255
Enables or disables Automatic Status Back function.
When the LSB of n = 0, the ASB function is disabled.
When the LSB of n = 1, the ASB function is enabled.
Only the LSB of n is valid.
If the ASB function is enabled, the printer automatically transmits a four -bytes data
status. After this, a four-byte data status is returned automatically only when printer
status change.
Transmit data status only via serial and/or USB interface. If printer has serial and
USB interface, data return to serial and USB interface at the same time.
Each of the four-byte status is defined as follows.
First byte (printer information)
Bit Off/On Hex. Status for ASB
0 0/1 00 Paper adequate/ Paper near end
1 0/1 02 Top cover closed / Top cover open
2 0/1 00/04 Paper adequate/ Paper end
3 0/1 00/08
Print head temperature normal/ Print head
overheated
4 0/1 00/10 Cutter normal/ Cutter error