Telpar MTP7632, Programming Manual

Page: 59 / 97

Confidential MTP7632 Programming Manual
Telpar 800-872-4886 53 -
[Reference]
printer .
• The seventh byte will be cleared up after the next cut.
• PrstIn indicates the state of PrstIn sensor before or after retraction, with paper
means that the paper holder is full of paper or some paper is absorbed on the
channels.
• When PrstIn sensor is in with paper state before retraction, the printer cannot judge
weather the paper was taken away by user in the retraction process
Explanation of above mentioned printer status.
1) Printing status
i
s defined as the process from printing startup to printing finish.
2) Cutting paper status is defined as the whole process from feeding paper to
cutting position before cut to back paper to normal position after cut.
3) PRST paper feeding status is defined as the process from the start of PRST presenting
paper after cutting paper status to the start of PRST holding paper for being taken
away.
DLE EOT n
GS f n
[Name]
[Format]
[Range]
[Description]
[Notes]
[Default]
[Reference]
Select font for Human Readable Interpretation (HRI) characters
ASCII GS f n
Hex 1D 66 n
Decimal 29 102 n
n = 0, 1, 48, 49
Selects a font for the HRI characters used when printing a bar code.
n selects a font from the following table:
n Font
0,48
Standard ASCII characters :
203DPI (12 × 24)
300DPI (18 x 34)
1,49
Compressed ASCII characters:
203DPI ( 9 x 17)
300DPI (12 x 24)
HRI indicates Human Readable Interpretation.
HRI characters are printed at the position specified by GS H .
n = 0
GS H , GS k
GS h n
[Name]
[Format]
Select bar code height
ASCII GS h n