Telpar MTP7632, Programming Manual

Page: 22 / 97

Confidential MTP7632 Programming Manual
Telpar 800-872-4886 16 -
ESC D n1...nk NUL
[Name]
[Format]
[Range]
[Description]
[Notes]
[Example]
[Default]
[Reference]
Set horizontal tab positions
ASCII ESC D n1... nk NUL
Hex 1B 44 n1...nk 00
Decimal 27 68 n1...nk 0
1 ≤ n ≤ 255
0 ≤ k ≤ 32
Sets horizontal tab positions.
♦
n+1 specifies the column number for setting a horizontal tab position from the
beginning of the line.
♦
k indicates the total number of horizontal tab positions to be set.
The horizontal tab position is stored as a value of [character width × n] measured
from the beginning of the line. The character width includes the right-side character
spacing, and double-width characters are set with twice the width of normal
characters.
This command cancels the previous horizontal tab settings.
Up to 32 tab positions (k = 32) can be set. Data exceeding 32 tab positions is
processed as normal data.
Transmit [n] k in ascending order and place a NUL code 0 at the end.
When [n] k is less than or equal to the preceding value [n] k-1, tab setting is finished
and the following data is processed as normal data.
ESC D NUL cancels all horizontal tab positions.
The previously specified horizontal tab positions do not change, even if the
character width changes.
The character width is independent for each standard and page mode.
When n = 8, printing position is at the ninth line
The default tab positions are at intervals of 8 standard ASCII characters (columns 9,
17, 25).
HT
ESC E n
[Name]
[Format]
[Range]
[Description]
Turn emphasized mode on/off
ASCII ESC E n
Hex 1B 45 n
Decimal 27 69 n
0 ≤ n ≤ 255
Turns emphasized mode on or off
♦
When the LSB of n is 0, emphasized mode is turned off.