manualshive.com logo in svg

Telos Alliance VX Enterprise, User Manual

Share
Download
Telos Alliance VX Enterprise User Manual Download Page 82

CHAPTER 4 | 

73

APPENDIX

Power Supply AC Input

 

♦

Hot-swap capable dual-redundant internal auto-ranging power supplies. 90 – 132 / 187 – 264 VAC, 50Hz/60Hz. IEC 
receptacle, internal fuse.

 

♦

Power consumption: 150 Watts

Operating Temperatures

 

♦

-10 degree C to +40 degree C, <90% humidity, no condensation

Studio Audio Connections

 

♦

Via Livewire IP/Ethernet. Each selectable group and fixed line has a send and receive input/output

 

♦

Each studio has a Program-on-Hold input

 

♦

Each Acoustic Echo Canceller has two inputs (signal and reference) and one output

 

♦

L™ AES67 equipped studios may take and supply audio directly to/from the network. Telos Alliance xNodes are 
available for pro analog and AES3 (AES/EBU) breakout.

 

♦

VX Enterprise supports AES67 connectivity.

Telco Connections

 

♦

Audio: standard RTP. Codecs: g.711μ-Law and A-Law, and G.722.

 

♦

Control: standard SIP Endpoint, ISDN PRI/T-1, ISDN BRI and POTS may be supported with the appropriate interfaces 
using an Asterisk Open source PBX.

Regulatory

 

♦

North America:

 FCC and CE tested and compliant, redundant power supplies are UL approved.

 

♦

Europe:

 Complies with the European Union Directive 2002/95/EC on the restriction of the use of certain hazardous 

substances in electrical and electronic equipment (RoHS), as amended by Commission Decisions 2005/618/EC, 
2005/717/ EC, 2005/747/EC (RoHS Directive), and WEEE.

Summary of Contents for VX Enterprise























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands