manualshive.com logo in svg

Telos Alliance VX Enterprise, User Manual

Share
Download
Telos Alliance VX Enterprise User Manual Download Page 79

CHAPTER 4 | 

70

APPENDIX

SIP Information and suggested reading

A Request for Comments (RFC) is a memorandum published by the Internet Engineering Task Force (IETF) describing 
methods, behaviors, research, or innovations applicable to the working of the Internet and Internet-connected systems. The 
IETF adopts some of the proposals published as RFCs as Internet standards. These are available at: www.ietf.org/rfc. Among 
those relevant to VoIP and SIP are:

RFC 1889: Real Time Protocol (RTP) - original version

RFC 3550 - Real Time Protocol (RTP) - latest version

RFC 1890: Real Time Protocol Audio Video Profiles (RTP/AVP) - original version

RFC 3551: Real Time Protocol Audio Video Profiles (RTP/AVP) - latest version

RFC 2327: Session Description Protocol (SDP) - original version

RFC 4566 - Session Description Protocol (SDP) - latest version

RFC 2543: Session Initiation Protocol (SIP) – original version

RFC 3261: Session Initiation Protocol (SIP) – latest version

RFC 3264: Codec negotiation

A. H. Inglis. “Transmission Features of the New Telephone Sets,” Bell System Technical Journal 17 (1938): 358-380. (Just for 
fun. Waaay back, Mr. Inglis proposed “high-fidelity” phones, noting that cost was the only barrier to better audio quality in the 
telephone network and predicting it would become common in the future. Took awhile…)

Books

Henry Sinnreich and Alan B. Johnston. Internet Communications Using SIP, John Wiley & Sons, Inc., New York, 2001.

Gonzalo Camarillo. SIP Demystified, McGraw-Hill, New York, 2002.

Steve Church and Skip Pizzi. Audio over IP: Building Pro AoIP systems with Livewire, Focal Press,  Burlington,MA and Oxford UK. 
2010 (Mighty fine fellas, these guys. Good book, too!)

Jonathan Davidson and James Peters. Voice over IP Fundamentals, Cisco Press, Indianapolis, 2000.

J. Alexander, C. Pearce, A. Smith, and D. Whetten, Cisco Call Manager Fundamentals 2nd Edition, Cisco Press, Indianapolis, 2006.

D. Au, B. Choi, R. Haridas, C. Hattingh, R. Koulagi, M. Tasker, L. Xia. Cisco IP Communications Express: Call Manager Express with 
Cisco Unity Express

, Cisco Press, Indianapolis, 2005.

Oliver Hersent, David Gurle, and Jean-Pierre Petit, IP Telephony: Packet-Based Multimedia Communications Systems, Addison-
Wesley, Reading, MA, 1999.

Switching to VOIP

 – O’Reilly

VOIP Hacking

 - O-Reilly

Asterisk

 - O-Reilly

Summary of Contents for VX Enterprise























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands