CHAPTER 4 |
54
APPENDIX
If you’re savvy, a much faster way to clear the matrix from 8x8 mono mode is to copy and paste the following text into a
terminal logged in (raw) on port 93: (IN ALL CAPS)
LOGIN
MIX 2 17:CLEAR
MIX 4 19:CLEAR
MIX 6 21:CLEAR
MIX 8 23:CLEAR
MIX 9 18:CLEAR
MIX 10 18:CLEAR
MIX 11 20:CLEAR
MIX 12 20:CLEAR
MIX 13 22:CLEAR
MIX 14 22:CLEAR
MIX 15 24:CLEAR
MIX 16 24:CLEAR
MIX 18 9:CLEAR
MIX 20 11:CLEAR
MIX 22 13:CLEAR
MIX 24 15:CLEAR
MIX 1 17:CLEAR
MIX 3 19:CLEAR
MIX 5 21:CLEAR
MIX 7 23:CLEAR
MIX 17 1:CLEAR
MIX 19 3:CLEAR
MIX 21 5:CLEAR
MIX 23 7:CLEAR
Once the mixer is cleared, we can begin setting up the I/O and the mix minus routing.
First, we need to route the physical inputs to the network sources (outputs to the network). Then we will route the physical
outputs to the Livewire Destinations. The idea is to route the VX’s output to physical outputs on the xNode. Then we want to
route Mix Minus to the VX’s input, but we want to mix caller 1’s audio in with the mix minus for caller 2 and vice versa.
The following image depicts this and the cross mix. The Inputs are highlighted in
Red
, the outputs in
Blue
and the cross mix in
Orange
for creating the new mix minuses.
