CHAPTER 4 |
67
APPENDIX
These supplies can be changed without powering down the system:
1.
Press the release button on the failed power supply.
2.
Use the handle to gently slide the power supply out the back of the chassis.
3.
Replace the failed power module with another of the same model.
4.
Slide the new power supply module into the power supply bay until it clicks into the locked position.
WARNING:
The bulk capacitors in all switch mode power supplies can hold a very substantial charge
for an extended period of time. The user is at risk of electrocution if proper safety is not practiced. DO
NOT disassemble the power supply. There are no user serviceable parts inside. Contact Telos Support
for replacement.
