tell Pager4 3GA.IN4.R2, Installation And User Manual

Page: 9 / 62

9
4 Configuring the Pager4
The device can be configured the following ways:

By computer via USB, using the programming software.

By computer over the Internet, using the programming software.
The Pager4 programming software is compatible with the following operating systems:

Windows 10 (32/64 bit)

Windows 8.x (32/64 bit)

Windows 7 (32/64 bit)
Installing the programming software : open the software setup application and follow the
instructions of the installation wizard to complete the installation. The latest version of the
programming software can be downloaded from the manufacturer’s website (
http://www.tell.hu ).
The Pager4 programming software can be used to configure all Pager4 device models.
4.1 The user interface and configuration options of the software
The user interface language can be selected
from the “
Language
” selection drop-down menu
found in the “
Software settings
” / “
Settings
”
menu.
The user interface skin can be changed using
the “
Skin
” dropdown-menu found in the “
Software settings
” / “
Settings
” menu, where you can
choose out of multiple appearance themes.
Context-sensitive help:
The “
Help
” section on the right hand side of the program window opens a context-sensitive help
by dragging the mouse pointer above it. You can pin the help window thus making it always
visible
by clicking on the “thumbtack” icon in the top right corner of the window. If you click on
any of the settings fields within the program window, you will get brief information about the
given option or setting in the help window. The content of the help window can be scrolled up
and down using the scrollbar placed on the right hand side of the help window, or using the
mouse wheel after clicking inside the help window. For better readability, the help window can
be resized by dragging the left-side border of the window horizontally using the mouse.
The software saves changes related to appearance upon closing and applies the saved settings
when reopened.
4.2 Methods of connecting to the device
For connecting to the device using the programming software, the following options are
available:
USB : direct connection using a USB A-B cable.
TEX-MVP : remote connection through the Internet via the TEX-MVP server. This option can be
used by central monitoring stations that own a TEX-MVP server.
TELLMon : remote connection through the Internet via the TELLMon receiver. This option can be
used by central monitoring stations that own a TELLMon receiver.
Cloud : remote connection through the Internet via the cloud server operated by the
manufacturer.