![tell Pager4 3GA.IN4.R2 Installation And User Manual Download Page 22](http://html1.mh-extra.com/html/tell/pager4-3ga-in4-r2/pager4-3ga-in4-r2_installation-and-user-manual_1083867022.webp)
22
Available options:
Read the settings from the device:
To read the settings from the device
click on the “
Read
” button. This will read all
settings in all menus.
Write the settings into the device:
After changing the settings or entering new settings, in order to take effect, it is
necessary to write the new settings into the device
by clicking on the “
Write
”
button. This will write the changes only, but all changes made in any menu.
Save settings to file:
To save all device
settings to file click on the “
Save to file
” button.
Load settings from file:
To load saved settings from file click on the “
Load from file
” button.
Firmware update:
By clicking
on the “
Firmware update
” button, the firmware of the device can be
updated. Clicking on the button, opens a pop-up window, where you can browse
the firmware file with
tf3
extension. When firmware upload is finished, the progress
window closes automatically and 5 seconds later the device restarts with the new
firmware.
Please note that the settings have to be written in the device in order to be applied after a
change is made. For this, click on the “Write”
button.
SIM:
PIN code
: if you wish to use PIN code management, enter in this section the PIN code of the
SIM card installed into the device. Otherwise disable PIN code request on the SIM card. If the
wrong PIN code has been entered, the device will try the code only once each time the code is
changed in the settings and PIN code error message will be shown in the system logs. If the
wrong code is configured 3 times consecutively, the SIM card will reach the PUK code request
stage. In this case install the SIM card into a cellphone, unlock the card by entering the PUK
code when requested, and configure the valid PIN code in the device settings.
APN
: the APN name necessary to connect to the Internet. (ask this from the GSM service
provider of the SIM card installed into the device). If no APN is configured, the device will not try
to connect to the Internet. In this case you can only use the functions which do not require
Internet connection, such as voice calls and SMS sending.
APN user name
: necessary only if the GSM service provider provides this and requires its
usage for the given APN.
APN password
: necessary only if the GSM service provider provides this and requires its usage
for the given APN.