tell Pager4 3GA.IN4.R2, Installation And User Manual

Page: 51 / 62

51
Network :

GSM operator : the name of the GSM operator used actually.

Data connection type : type of actual data connection.

GSM signal : actual GSM signal level (None/Very low, Weak, Medium, Good, Excellent).

IP address : the actual IP address of the device.

Number of connections : the number of active connections with servers/receivers.

Modem status : the actual status of the GSM modem.

Cloud connection : the cloud server connection status.
Inputs / Outputs :

IN1…IN4/IN6
: the actual state of the contact inputs.

Output1/Output2 : the actual state of the output(s) (OUT1/OUT2)
Reporting channels :

IP1…IP4
: connection status of the configured servers and IP receivers
When connected to the device locally or remotely, the following options will be available:

Query :
This button appears in case of remote connection only. By clicking on it, status
information will be downloaded from the device. This is not needed for USB
connection, since in that case the data is downloaded automatically.

Arm :
The device can be armed by clicking on this button. This option is not available if
the “
Always armed
” or “
Bistable contact
” option is selected at the “
Arming /
Disarming options
” in the “
General
” settings menu.

Disarm :
The device can be disarmed by clicking on this button. This option is not available if
the “
Always armed
” or “
Bistable contact
” option is selected at the “
Arming /
Disarming options
” in the “
General
” settings menu.

Send test report :
A periodic test report event can be generated by clicking on this button.

Activate output 1 (IN4.R2 model only):
Output OUT1 can be activated by clicking on this button. The output remains
activated until deactivated manually or by an event which has been configured to
control the given output in a way that deactivates it, or a power loss occurs.

Activate output 2 (IN4.R2 model only):
Output OUT2 can be activated by clicking on this button. The output remains
activated until deactivated manually or by an event which has been configured to
control the given output in a way that deactivates it, or a power loss occurs.